250 Ton Mechanical Iron Worker Energy Saving High Efficiency Multiple Function

 Iron Worker Q35Y-16 Q35Y-16 --20 Q35Y-25 Q35Y-30 Q35Y-40 Mechanical Iron Worker

Q35Y-Series industrial-grade hydraulic Iron Worker featuring multiple function, including: Round hole punching, Square hole punching, Oblong hole punching, Steel plate punching, Flat bar punching, Angle steel punching, C-channel puncing, H-beam punching, I-beam punching, Steel plate bending, Angle steel notching and bending, Angle steel shearing/cutting, Flat bar shearing/cutting, Round/square bar shearing/cutting, C-channel shearing/cutting, I-beam shearing/ cutting, T-bar shearing/cutting, Press brake, Angle bending, Pipe notching.

It come standard with: Quick-change coupling nut &sleeve, squaring &arm with scale, electronic back gauge, Gauging table with stops, Punching base table, more safety guards.

1.  Punching
Full range of universal punches and dies are available. Unique style allows for large angle iron punching and large channel punching. Large viewing window on stripper swing away design for ease of operation. large two piece gauging table with rulers and stop as standard fittings. Quick change coupling nut and sleeve for rapid replacement of change.

2.  Shearing
Round and square bar shear has multiple holes for a variety of sizes. Adjustable hold down device for round/square bar, channel/beam cutting. Large strong guarding for max safety. The angle shear has the ability to cut angle at 45°both top and bottom. This gives the operator the ability to make a picture frame corner for perfect welds. Diamond shaped blade for quality cuts that is minimal material lost and deformity. Easily adjustable hold-down device for accurate plate cutting. Large 15″squaring arm with inlaid scale. Special anti-distorted blade for quality cutting. Lower blade has four usable edges. There is screw allow for gap adjust no shim needed.

3.  Notching
Unique design allows for cutting of angle and flat bar. Electrical interlock safety guard and three gauging stops for precise positioning. Notching section of this hydraulic ironworker is perfect for notching out metal plate, angle iron and much more. Notching station also has an oversized table with material stops. This machine can also be outfitted with the optional vee notched.

4.  Bending
Also bend the plate below 500mm. All the components of Machine are highest quality in their safety, function, capability and maintenance.

Specification

Model	Q35Y-20	Q35Y-25	Q35Y-30	Q35Y-40
Pressure(Ton)	90	110	140	200
Max.cutting thickness(mm)	20	25	30	40
Plate strength(N/mm2)	≤450	≤450	≤450	≤450
Cutting angle(degree)	8°	8°	8°	8°
Shearing size of one stroke(mm)	20x330 10×480	25x330 16×600	30x355 20×600	35x400 25×700
Ram stroke(mm)	80	80	80	100
Cycles/min(20mm stroke)(mm)	8	6	6	8-25
Throat depth(mm)	355	400	600	600
Punching thickness(mm)	20	25	26	35
Max.Punching diameter(mm)	30	35	38	41
Power of main motor(kw)	5.5	7.5	11	15
Overall dimensions(L*W*H)mm	1860x800x1900mm	2355x960x2090mm	2680x1040x2300mm	2850x1300x2400mm
Weight of machine(kg)	2500	4500	6800	9500