Hydraulic 6500KN 16mm Mild Steel 600 Ton NC Press Brake

NC Press Brake 600ton For 16mm Mild Steel , Big Thickness NC Hydraulic Press Brake

EB5 cnc hydraulic press brake for sale
1. Steel plate welded structure, hydraulic transmission, accumulator return, holistic processed, vibrating toeliminate stress, high strength and good rigidity.
2. Mechanical torque system makes sure the synchronization of cylinders.
3. The stroke of slider and back gauge is adjusted automatically by double servo motors or transducer, and showed on CNC Mechanical torque or NC control panel.
4. Slanting wedges can be chosen to install on the top dies which can be adjusted by hands or automatically. Hydraulic compensation system is installed under the worktable.

machine for cutting and bending iron Best price bending machine for rebar

STANDARD EQUIPMENTS

√  Height-adjustable and movable sliding front support arm.

√  The top and bottom tools are surface hardened by special treatment.

√  Netherlands DELEM E21 CNC system.

√  X-axis servo motor drive, timing belt + ball screw drive, high repeat positioning accuracy.

√  3 can fine-tune the fingers.

√  Optional metric and inch measurement, Chinese and English display.

√  Foot pedals are produced according to CE standards and are suitable for single and multiple bends.

√  Cylinder and top beam cover

√  Pre-adjust electrical requirements based on customer's geographic area.

OPTIONAL EQUIPMENTS

√  Special strokes and throat depth provide additional advantages for deep bends.

√  CNC system E200, E300,E210.

√  Special rear cover fingers can be added on the optional backgauge stroke.

√  Hydraulic oil heating and cooling.

√  Customized table width and bottom tool V opening.

√  Optional top and bottom tool lengths are different.

√  Box and pole bent special tools.

√  Laser avant-garde option.

√  WILA top and bottom tool clamping systems.

√  Rol 1, 2, 3, 4, 5 different top and bottom quick release clamping systems.

√  The tool cabinet is mounted on one side of the machine, keeping the tool clean and easily accessible.

√  The automatic sliding system automatically lubricates and it is highly recommended to extend the service life.

√  U-shaped special bottom tool for bending thick material.

√  Additional front support arms prevent waves on thin materials.

√  Customize the machine according to the customer's special parameters.

√  According to the customer's requirements, the electrical panel and/or controller can be mounted on the right side of the machine.

Main Specification: